Job title:
Funded PhD position in Selective area growth of GeSn for infrared photonic devices
Company:
Job description
Offer DescriptionContext. The capability to integrate active and passive optoelectronic devices on a Si wafer is an essential paradigm in the quest for the development of low-cost and energy-efficient data communication, imaging, and quantum sensing technologies. To this end, a monolithic all-group IV semiconductor platform is at reach using direct band gap GeSn semiconductors.1 Over the last decade, tremendous progress was made in the epitaxial growth of GeSn, where a direct band gap material (i.e. high efficiency for the optical emission) is obtained at Sn contents of
9 at.%. Prototypes of GeSn photodetectors, lasers, and LEDs have been fabricated from the short-wave infrared (SWIR: 1.5-3 μm) to mid-wave infrared (MWIR: 3-8 μm) wavelengths.2,3 The main bottleneck with the GeSn technology is, however, the large number of structural defects that severely reduces the efficiency of the photonic devices made using GeSn. This prevents a wide scale adoption of GeSn photonics in favor of conventional, yet expensive III-V and II-VI semiconductor technologies.
Project. The growth of GeSn is commonly performed on Si using Ge as an interlayer in a chemical vapor deposition (CVD) reactor, hence with an industrial-compatible fabrication process. However, the lattice-mismatch between GeSn and the Ge/Si substrate leads to compressive strain in GeSn and plastic strain relaxation results in structural defects. Defects are a source of nonradiative recombination and largely contribute to the dark current of GeSn photonic devices, in turn strongly reducing efficiency.
This thesis will overcome these challenges and develop the selective area growth (SAG) of defect-free GeSn p-i-n diodes from nanometer-size openings that are patterned into an oxide mask layer on Si. The SAG has proven to be a highly valuable approach for the integration of defect-free III-V semiconductors on Si,4 with similar results that are now being explored in Ge.5 The GeSn growth will be selectively confined in very small regions of the patterned oxide/Si wafer. In SAG reducing the lateral dimensions of the patterned oxide windows will strongly decrease the defect density in the epitaxially-grown GeSn layer through dislocation filtering. The unmatched crystalline quality of SAG GeSn will boost the efficiency of infrared optoelectronic devices and thus establish a robust, scalable monolithic infrared photonics platform using group IV semiconductor materials. Photodetector devices made of SAG GeSn p-i-n diodes will be fabricated as a template system to demonstrate the effectiveness of SAG compared to the existing GeSn technology based on unpatterned GeSn samples.2
Competences to be acquired.
(i) Epitaxial growth of Sn-based group IV semiconductors using CVD and molecular beam epitaxy (MBE) tools.
(ii) Structural characterization of the SAG materials down to the atomic-level.
(iii) Fabrication of infrared photonic devices in a cleanroom facility.
(iv) Optoelectronic characterization of materials and devices.
Required skills. Background in solid-state physics and materials science, interest in performing experiments in the lab, working in a collaborative team, and contributing to international collaborations.
Starting date. By the 1st October 2024.
PhD funding. Thesis funded by Initiatives de Recherche à Grenoble Alpes (IRGA).
Supervisor. Dr. Simone Assali (CEA-IRIG/PHELIQS, Grenoble).
Further reading.
1. Monolithic infrared silicon photonics: The rise of (Si)GeSn semiconductors.
2. High-Bandwidth Extended-SWIR GeSn Photodetectors on Silicon.
3. Electrically injected GeSn lasers with peak wavelength up to 2.7 μm.
4. GaAs nano-ridge laser diodes fully fabricated in a 300 mm CMOS pilot line.
5. Coherent Hole Transport in Selective Area Grown Ge Nanowire Networks.To apply for this position, send your application (CV and motivation letter) by e-mail to: .RequirementsResearch Field Physics Education Level Master Degree or equivalentResearch Field Chemistry Education Level Master Degree or equivalentResearch Field Engineering » Materials engineering Education Level Master Degree or equivalentSkills/QualificationsBackground in solid-state physics and materials science, interest in performing experiments in the lab, working in a collaborative team, and contributing to international collaborations.Languages ENGLISH Level GoodInternal Application form(s) neededPhD thesis project_CEA Grenoble_GeSn epitaxy.pdfEnglish(1.33 MB – PDF)Additional InformationWork Location(s)Number of offers available 1 Company/Institute CEA-IRIG Grenoble Country France City Grenoble Postal Code 38054 Grenoble cedex 9 Street 17 av. des Martyrs GeofieldWhere to apply E-mail[email protected]Contact CityGrenoble WebsiteStreet17 av. des Martyrs Postal Code38054 E-Mail[email protected]STATUS: EXPIRED
Expected salary
Location
Grenoble, Isère
Job date
Fri, 26 Apr 2024 00:25:31 GMT
To help us track our recruitment effort, please indicate in your email/cover letter where (vacanciesin.eu) you saw this job posting.
